Directions to Hog Farm

Hog Farm Custom MachineIf you are in the Mid Columbia River Gorge area, or even in the great Pacific Northwest, we can repair your Hog for you. We've even had customers who have traveled from California and Seattle after hearing about our reputation for quality service. We live in a small community called Timber Valley, a few miles north of Appleton, Washington.

We love living in the mountains, and life in a rural area. But even though we are located in the mountains, we are still within easy driving from the Columbia River Gorge. We are about 20 minutes away from Highway 14 (turn off just west of the Klickitat River at Lyle, Washington). And we are only 40 minutes from The Dalles, Oregon and Interstate I-84 in the Columbia River Gorge. The Portland/Vancouver metropolitan area is about an hour's drive from Lyle. (If you don't get stuck behind a logging truck!)

 

Hog Farm MapHOG FARM CUSTOM MACHINE
12 Chuckwagon Road
Appleton WA 98602
(509) 365-3917

Click on the map to view a larger version.
or view a map using MAPQUEST

 

And just where IS Hog Farm Custom Machine?

We are located 12 miles north of Lyle, Washington.

The numbers on the directions below correspond to the map you will view if you click on the map image above.

Lyle Washington Highway 14 cut-off


Take Highway 14 in Washington.


Highway 14 runs along the Columbia River, and is about 72 miles from Vancouver, Washington. If you are coming from Oregon, you can cross the Columbia River at either The Dalles or Hood River.

 

Turn NORTH at the Appleton cut-off on Old Hwy 8.

This cut-off is located on the west side of the bridge that crosses over the Klickitat River. This photo was taken from the cut off, looking east at the bridge.

 

Appleton & Timber Valley road sign
Turn right on Canyon Rd.

You'll go up the hill about a mile on Hwy 8 , and you'll see a road that goes off to the right (north). This is Canyon Road, and the sign is marked "Timber Valley, Appleton, and Snowden."


Keep traveling NORTH on Canyon Rd.

Keep to the right, and stay on Canyon Road. You'll keep driving up a long, winding road for several miles. Fortunately the road is paved.

Go STRAIGHT at the Four Corners and follow the signs to Timber Valley.

(The four corners is where Canyon Rd. intersects with Appleton-Klickitat Rd. You'll want to continue NORTH straight through the four way intersection.)


Timber Valley Tree
Take a LEFT at big tree with a small wooden sign on it that says Timber Valley.

There are two roads marked Timber Valley. You should pass by the first road that goes to the right (east), and continue on to the second road that goes to the left (west). You'll know you have found the correct road when you see the big tree with the wooden sign. It is a graveled road. This tree is approximately 2 miles past the Four Corners intersection. It's easy to miss the sign that says Timber Valley. Note from the photo that the sign isn't very large.

Chuckwagon Road sign Timber Valley WashingtonTurn RIGHT onto Chuckwagon Road.

You'll see the sign for Hog Farm. Follow Chuckwagon Road all the way to the end.

Hog Farm is the last driveway on the right.

The address is 12 Chuckwagon Road.

 

 

 
Leather Up and Ride with Hog Farm Custom Machine!
We Accept:
HOG FARM CUSTOM MACHINE
Rick Esaacson
12 Chuckwagon Road, Appleton WA 98602

LOCAL PHONE: (509) 365-3917 FAX: (509) 365-3973

WWW.HOGFARMCYCLES.COM
EMAIL:
info@hogfarmcycles.com
COPYRIGHT 2007 © ALL RIGHTS RESERVED
DISCLAIMER: This site is not connected with nor endorsed by HARLEY DAVIDSON COMPANY. Motorcycle model names are strictly the copyright of Harley Davidson ™ Company. All references to their products past & present are for 'information only' to enable Hog Farm Custom Machine to assist owners of Harley Davidson ™ machines, and should not be taken as inference that Hog Farm Custom Machine has in some way official HD dealer status.


 

">